0 items in the shopping cart
  • No products in the cart.

Shop

geneva-a13

Geneva Drive

£0.00

Geneva drive to download and make

Category: Tags: , ,

Description

geneva-a13

The Geneva Drive is an elegant mechanism used to convert rotary motion into intermittent motion.  Click on the image above to view a video of the drive in action on my Instagram feed.geneva-a15 I’ve designed the part for this project in Autodesk Fusion 360. If you have access to a 3D printer you can follow these construction instructions to make your own 3D printed Geneva Drive.

They should be suitable for most 3D printers.

I printed the parts out in a variety of colours of PLA from rigid.ink using an Ultimaker 2.

geneva-a14
Here are the five parts ready for assembly.You will also need some cyano glue a small screw and a washer.

geneva-a07A dot of cyano glue holds the handle and crank together.

geneva-a08Thread the crank through the hole in the base.

geneva-a09Fit the drive wheel to the crank. A dot of cyano holds the drive wheel onto place. Make sure that it turns freely.

geneva-a10Fit the Geneva wheel over the pin on the base so that it lines up with the drive wheel as shown.

geneva-a11A small screw and washer holds the Geneva wheel into place. Don’t over tighten it as the wheel needs to be able to turn freely.

geneva-a12That’s it! Your completed Geneva Drive.

 

Additional information

3D Printing

Reviews

There are no reviews yet.

Add Review

Add Review

Be the first to review “Geneva Drive”

Related Products